Ubuntu
snapd package

Browsing Afrikaans translation

  1. Mantic (23.10)
  2. Template “snappy”
  3. Afrikaans (af)
Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Afrikaans guidelines.

These translations are shared with snapd trunk series template snappy.

28 → 37 of 925 results First • • • Last
28.

The fde-setup-request command is used inside the fde-setup hook. It will
return information about what operation for full-disk encryption is
requested and auxiliary data to complete this operation.

The fde-setup hook should do what is requested and then call
"snapctl fde-setup-result" and pass the result data to stdin.

Here is an example for how the fde-setup hook is called initially:
$ snapctl fde-setup-request
{"op":"features"}
$ echo '{"features": []}' | snapctl fde-setup-result

Alternatively the hook could reply with:
$ echo '{"error":"hardware-unsupported"}' | snapctl fde-setup-result

And then it is called again with a request to do the initial key setup:
$ snapctl fde-setup-request
{"op":"initial-setup", "key": "key-to-seal"}
$ echo "{"sealed-key":"$base64_encoded_sealed_key"}" | snapctl fde-setup-result
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die fde-setup-request bevel is gebruik binne in die fde-setup haak. Dit sal
inligting terug te gee oor waarvoor operasie vol-skyf encryption is
gevraagde en hulpdata om hierdie operasie te voltooi.

Die fde-setup haak behoort doen wat versoek word en dan bel
"snapctl fde-setup-result" en slaag die resultaat data tot stdin.

Hier is 'n voorbeeld vir hoe die fde-setup haak is heet aanvanklik:
$ snapctl fde-setup-request
{"op":"features"}
$ echo '{"features": []}' | snapctl fde-setup-result

Alternatiewelik die haak kon antwoord met:
$ echo '{"error":"hardware-unsupported"}' | snapctl fde-setup-result

En dan word dit weer geroep met 'n versoek om die aanvanklike sleutel opstelling te doen:
$ snapctl fde-setup-request
{"op":"initial-setup", "key": "key-to-seal"}
$ echo "{"sealed-key":"$base64_encoded_sealed_key"}" | snapctl fde-setup-result
Translated and reviewed by Bernard Stafford
Located in overlord/hookstate/ctlcmd/fde_setup.go:36
29.

The fde-setup-result command sets the result data for a fde-setup hook
reading it from stdin.

For example:
When the fde-setup hook is called with "op":"features:
$ echo '{"features": []}' | snapctl fde-setup-result

When the fde-setup hook is called with "op":"initial-setup":
$ echo "{"sealed-key":"$base64_encoded_sealed_key"}" | snapctl fde-setup-result
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die fde-setup-result bevel stel die resultaat data vir 'n fde-setup haak
lees dit vanaf stdin.

Byvoorbeeld:
Wanneer die fde-setup haak word met genoem "op":"features:
$ echo '{"features": []}' | snapctl fde-setup-result

Wanneer die fde-setup haak word met genoem "op":"initial-setup":
$ echo "{"sealed-key":"$base64_encoded_sealed_key"}" | snapctl fde-setup-result
Translated and reviewed by Bernard Stafford
Located in overlord/hookstate/ctlcmd/fde_setup.go:101
30.

The file-access command returns information about a snap's file system access.

This command is used by the xdg-document-portal service to identify
files that do not need to be proxied to provide access within
confinement.

File paths are interpreted as host file system paths. The tool may
return false negatives (e.g. report that a file path is unreadable,
despite being readable under a different path). It also does not
check if file system permissions would render a file unreadable.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die lêer-toegang opdrag terug inligting oor toegang lêer stelsel 'n snap se.

Hierdie bevel word deur die xdg-dokument-portaaldiens gebruik om te identifiseer
lêers wat nie nodig het om instaanbedien om toegang te verskaf binne
confinement.

Lêerpaaie word geïnterpreteer as gasheerlêerstelselpaaie. Die instrument mag
return false negatiewe (bv verslag dat 'n lêer pad is deurmekaar,
ten spyte daarvan dat leesbare onder 'n ander pad). Dit doen ook nie
tjek of toestemmings vir lêerstelsel 'n lêer onleesbaar maak.
Translated and reviewed by Bernard Stafford
Located in cmd/snap/cmd_routine_file_access.go:43
31.

The find command queries the store for available packages.

With the --private flag, which requires the user to be logged-in to the store
(see 'snap help login'), it instead searches for private snaps that the user
has developer access to, either directly or through the store's collaboration
feature.

A green check mark (given color and unicode support) after a publisher name
indicates that the publisher has been verified.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die vonds opdrag navrae die winkel vir beskikbare pakkette.
Met die - privaat vlag, wat vereis dat die gebruiker by die winkel moet aanmeld
(see 'snap help login'), dit soek in plaas daarvan na privaat snaps wat die gebruiker het
het ontwikkelaars toegang tot, hetsy direk of deur die winkel se samewerking
funksie.

'N Groen regmerkie (gegewe kleur en ondersteuning van unicode) na die naam van die uitgewer
dui daarop dat die uitgewer is geverifieer.
Translated and reviewed by Bernard Stafford
Located in cmd/snap/cmd_find.go:40
32.

The forget command deletes a snapshot. This operation can not be
undone.

A snapshot contains archives for the user, system and configuration
data of each snap included in the snapshot.

By default, this command forgets all the data in a snapshot.
Alternatively, you can specify the data of which snaps to forget.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die vergeet bevel skrap 'n kiekie. Hierdie bewerking kan nie wees nie
ongedaan.

N' kiekies bevat argiewe vir die gebruiker, stelsel en konfigurasie
data van elke snap ingesluit in die kiekie.

By verstek, hierdie-bevel vergeet al die data in a kiekie.
Alternatiewelik, jy kan die data spesifiseer van watter snaps na vergeet.
Translated by Jurgens J Schoeman
Located in cmd/snap/cmd_snapshot.go:66
33.

The get command prints configuration options for the current snap.

$ snapctl get username
frank

If multiple option names are provided, a document is returned:

$ snapctl get username password
{
"username": "frank",
"password": "..."
}

Nested values may be retrieved via a dotted path:

$ snapctl get author.name
frank

Values of interface connection settings may be printed with:

$ snapctl get :myplug usb-vendor
$ snapctl get :myslot path

This will return the named setting from the local interface endpoint,
regardless whether it's a plug or a slot. Returning the setting from the
connected snap's endpoint is also possible by requesting the setting explicitly
with optional --plug and --slot command options:

$ snapctl get :myplug --slot usb-vendor

This requests the "usb-vendor" setting from the slot that is connected to
"myplug".
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.

Die kry bevel afdruk konfigurasie opsies vir die huidige snap.

$ snapctl get username
frank

Indien verskeie opsiename verskaf word, word 'n dokument teruggestuur:

$ snapctl get username password
{
"username": "frank",
"password": "..."
}

Geneste waardes kan via 'n stippelpad herwin word:

$ snapctl get author.name
frank

Waardes van koppelvlak verbinding instellings kan gedruk word:

$ snapctl get :myplug usb-vendor
$ snapctl get :myslot path

Dit sal die genoemde instelling terugstuur vanaf die plaaslike koppelvlak eindpunt,
ongeag of dit 'n prop of 'n gleuf is. Keer die instelling terug van die
gekoppelde snap se eindpunt is ook moontlik deur die instelling uitdruklik aan te vra
met opsioneel --plug en --slot bevel opsies:

$ snapctl get :myplug --slot usb-vendor

Hierdie versoek die "usb-vendor" instelling vanaf die gleuf waaraan gekoppel is
"myplug".
Translated and reviewed by Bernard Stafford
Located in overlord/hookstate/ctlcmd/get.go:52
34.

The get command prints configuration options for the provided snap.

$ snap get snap-name username
frank

If multiple option names are provided, the corresponding values are returned:

$ snap get snap-name username password
Key Value
username frank
password ...

Nested values may be retrieved via a dotted path:

$ snap get snap-name author.name
frank
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.

Die kry-opdrag druk opstellingsopsies vir die gegewe snap.

$ snap kry snap-name gebruikersnaam
frank
As meerdere opsiename verskaf word, word die ooreenstemmende waardes teruggestuur:

$ snap kry snap-name gebruikersnaam wagwoord
Sleutel Waarde
gebruikersnaam frank
wagwoord...

Geneste waardes kan opgespoor word via 'n stippelbaan:

$ snap kry snap-naam skrywer.naam
frank
Translated and reviewed by Bernard Stafford
Located in cmd/snap/cmd_get.go:34
35.

The help command displays information about snap commands.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die hulp bevel vertoon inligting omtrent snap bevels.
Translated by Jurgens J Schoeman
Located in cmd/snap/cmd_help.go:36
36.

The info command shows detailed information about snaps.

The snaps can be specified by name or by path; names are looked for both in the
store and in the installed snaps; paths can refer to a .snap file, or to a
directory that contains an unpacked snap suitable for 'snap try' (an example
of this would be the 'prime' directory snapcraft produces).
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die info bevel wys gedetailleerde inligting omtrent snaps.

Die snaps kan gespesifiseer word deur naam of deur 'pad; name is' gekyk vir beide in die
winkel' en in die geïnstalleer snaps; paadjies kan verwys na a .snap lêer, of na a
gids daardie bevat 'n uitgepak snap geskik vir 'snap try' ('n voorbeeld
van hierdie sou wees die 'prime' gids snaphandwerk produceert).
Translated by Jurgens J Schoeman
Located in cmd/snap/cmd_info.go:59
37.

The install command installs the named snaps on the system.

To install multiple instances of the same snap, append an underscore and a
unique identifier (for each instance) to a snap's name.

With no further options, the snaps are installed tracking the stable channel,
with strict security confinement. All available channels of a snap are listed in
its 'snap info' output.

When --revision is used, a later refresh will typically undo the revision
override, taking the snap back to the current revision of the channel it's
tracking.

Use --name to set the instance name when installing from snap file.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

Die installasie bevel installeer die genoemde snaps op die stelsel.

Om veelvuldige gevalle van dieselfde snap te installeer, voeg 'n onderstreep en 'n
unieke identifiseerder (vir elke geval) na 'n snap se naam.

Met geen verdere opsies nie, word die snaps geïnstalleer om die stabiele kanaal op te spoor,
met streng sekuriteitsbeperking. Alle beskikbare kanale van 'n snap word in gelys
Dit is 'snap info' uitset.

Wanneer --revision gebruik word, sal 'n latere herlaai gewoonlik die hersiening ongedaan maak
ignoreer, neem die snap terug na die huidige hersiening van die kanaal wat dit is
spooring.

Gebruik --name om die naam van die instansie te stel wanneer vanaf snap lêer installeer.
Translated and reviewed by Bernard Stafford
Located in cmd/snap/cmd_snap_op.go:52
28 → 37 of 925 results First • • • Last

This translation is managed by Ubuntu Afrikaans Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Bernard Stafford, Jurgens J Schoeman.