Browsing Spanish translation

Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Spanish guidelines.

These translations are shared with snapd trunk series template snappy.

1019 of 815 results
10.

The auto-import command searches available mounted devices looking for
assertions that are signed by trusted authorities, and potentially
performs system changes based on them.

If one or more device paths are provided via --mount, these are temporarily
mounted to be inspected as well. Even in that case the command will still
consider all available mounted devices for inspection.

Assertions to be imported must be made available in the auto-import.assert file
in the root of the filesystem.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

El comando auto-import busca dispositivos montados disponibles buscando
aserciones firmadas por autoridades de confianza, y potencialmente
lleva a cabo cambios en el sistema basados en ellos.

Si una o más rutas de dispositivo se proporcionan mediante --mount, éstas se montan
temporalmente para ser inspeccionadas también. Incluso en ese caso, el comando
seguirá considerando todos los dispositivos montados disponibles para inspección.

Las aserciones que se importarán deben estar disponibles en el archivo
auto-import.assert en la raíz del sistema de archivos.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_auto_import.go:231
11.

The buy command buys a snap from the store.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

La orden buy compra un snap de la tienda.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_buy.go:33
12.

The changes command displays a summary of system changes performed recently.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

El comando changes muestra un resumen de los cambios del sistema realizados recientemente.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_changes.go:35
13.

The check-snapshot command verifies the user, system and configuration
data of the snaps included in the specified snapshot.

The check operation runs the same data integrity verification that is
performed when a snapshot is restored.

By default, this command checks all the data in a snapshot.
Alternatively, you can specify the data of which snaps to check, or
for which users, or a combination of these.

If a snap is included in a check-snapshot operation, excluding its
system and configuration data from the check is not currently
possible. This restriction may be lifted in the future.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

El comando check-snapshot verifica los datos de usuario, sistema y
configuración de los snaps incluidos en la instantánea especificada.

La operación de verificación ejecuta la misma verificación de integridad
de datos que se realiza cuando una instantánea es restaurada.

De manera predeterminada, este comando comprueba todos los datos
en una instantánea. Alternativamente, puede especificar los datos de
los snaps que se comprobarán o los usuarios o una combinación de estos.

Si se incluye una snap en una operación check-snapshot, excluir los
datos de sistema y configuración de la verificación, no es posible
actualmente. Esta restricción podría quitarse en el futuro.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_snapshot.go:76
14.

The confinement command will print the confinement mode (strict,
partial or none) the system operates in.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

El comando confinement imprimirá el modo de confinamiento (estricto,
parcial o ninguno) en el cual opera el sistema.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_confinement.go:31
15.

The connect command connects a plug to a slot.
It may be called in the following ways:

$ snap connect <snap>:<plug> <snap>:<slot>

Connects the provided plug to the given slot.

$ snap connect <snap>:<plug> <snap>

Connects the specific plug to the only slot in the provided snap that matches
the connected interface. If more than one potential slot exists, the command
fails.

$ snap connect <snap>:<plug>

Connects the provided plug to the slot in the core snap with a name matching
the plug name.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

La orden connect conecta un enchufe a una ranura.
Se puede llamar de las siguientes maneras:

$ snap connect <snap>:<enchufe> <snap>:<ranura>

Conecta el enchufe dado a una ranura dada.

$ snap connect <snap>:<enchufe> <snap>

Conecta el enchufe especificado a la única ranura en el snap proporcionado
que coincide con la interfaz conectada. Si existe más de una ranura potencial,
la orden falla.

$ snap connect <snap>:<enchufe>

Conecta el enchufe proporcionado a la ranura en el snap principal con un
nombre que coincide con el nombre del enchufe.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_connect.go:37
16.

The connections command lists connections between plugs and slots
in the system.

Unless <snap> is provided, the listing is for connected plugs and
slots for all snaps in the system. In this mode, pass --all to also
list unconnected plugs and slots.

$ snap connections <snap>

Lists connected and unconnected plugs and slots for the specified
snap.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

El comando connections lista conexiones entre ranuras y enchufes
del sistema.

A menos que se proporcione <snap>, se listan las ranuras y enchufes
conectados de todos los snaps en el sistema. En este modo, incluya
--all para listar también las ranuras y enchufes no conectados.

$ snap connections <snap>

Lista las ranuras y enchufes conectados y no conectados para el
snap especificado.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_connections.go:42
17.

The console-conf-start command starts synchronization with console-conf

This command is used by console-conf when it starts up. It delays refreshes if
there are none currently ongoing, and exits with a specific error code if there
are ongoing refreshes which console-conf should wait for before prompting the
user to begin configuring the device.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.

El comando console-conf-start inicia sincronización con console-conf

Este comando es utilizado por console-conf cuando inicia. Retrasa las recargas
si no hay ninguna actualmente en proceso y termina con un código de error
específico si hay varias recargas en proceso con lo que console-conf esperará
antes de solicitar al usuario para comenzar la configuración del dispositivo.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_routine_console_conf.go:40
18.

The create-cohort command creates a set of cohort keys for a given set of snaps.

A cohort is a view or snapshot of a snap's "channel map" at a given point in
time that fixes the set of revisions for the snap given other constraints
(e.g. channel or architecture). The cohort is then identified by an opaque
per-snap key that works across systems. Installations or refreshes of the snap
using a given cohort key would use a fixed revision for up to 90 days, after
which a new set of revisions would be fixed under that same cohort key and a
new 90 days window started.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

El comando create-cohort crea un conjunto de claves de grupo para un conjunto
de snaps dado.

Un grupo es una vista o instantánea del mapa de canal de un snap en un punto
dado en el tiempo que fija el conjunto de revisiones del snap dadas otras
restricciones (p.ej. canal o arquitectura). El grupo se identifica con una clave por
snap opaca que funciona a través de sistemas. Las instalaciones o refrescos del
snap usando una clave de grupo dada usará una revisión fija de hasta 90 días,
después de los cuales se fijará un conjunto de revisiones nuevo bajo la misma
clave de grupo y comenzará una nueva ventana de 90 días.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_create_cohort.go:30
19.

The create-key command creates a cryptographic key pair that can be
used for signing assertions.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

El comando create-key crea un par de claves criptograficas que se pueden
usar para firmar afirmaciones.
Translated and reviewed by Rodrigo Lledó
Located in cmd/snap/cmd_create_key.go:41
1019 of 815 results

This translation is managed by Ubuntu Spanish Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: ., Adolfo Jayme Barrientos, Alex, Arturo Muñiz, Daniel, Daniel Tamez Gil, Daniel Vargas, Demuxer, Fco. Javier Serrador, Hector A. Mantellini, Jadenpaul M. Albay, Jesus Brito Mendoza, Leo Arias, Paco Molinero, Removed by request, Ricardo Pérez López, Rodrigo Lledó, aitor.