Ubuntu
snapd package

Browsing Catalan translation

  1. Focal (20.04)
  2. Template “snappy”
  3. Catalan (ca)
Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Catalan guidelines.

These translations are shared with snapd trunk series template snappy.

7 → 16 of 815 results First • • • Last
7.

The advise-snap command searches for and suggests the installation of snaps.

If --command is given, it suggests snaps that provide the given command.
Otherwise it suggests snaps with the given name.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre advise-snap cerca i suggereix la instal·lació de snaps.

Si es dóna --ordre, suggereix snaps que proveeixen l'odre donada.
En cas contrari suggereix snaps amb el nom donat.
Translated and reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_advise.go:57
8.

The alias command aliases the given snap application to the given alias.

Once this manual alias is setup the respective application command can be
invoked just using the alias.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre alias fa un àlies per a l'aplicació snap donada per a l'àlies donat.

Un cop s'estableix aquest àlies manual, l'ordre respectiva d'aplicació es pot
invocar simplement usant l'àlies.
Translated and reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_alias.go:45
9.

The aliases command lists all aliases available in the system and their status.

$ snap aliases <snap>

Lists only the aliases defined by the specified snap.

An alias noted as undefined means it was explicitly enabled or disabled but is
not defined in the current revision of the snap, possibly temporarily (e.g.
because of a revert). This can cleared with 'snap alias --reset'.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre aliases fa una llista de tots els àlies disponibles al sistema i el seu estat.

$ snap aliases <snap>

Fa una llista sols dels àlies definits per l'snap especificat.

Un àlies marcat com no definit significa que va ser habilitat o deshabilitat explícitament
però no està definit en la revisió actual de l'snap, possiblement de manera temporal (per
exemple per una reversió). Això es pot netejar amb «snap alias --reset».
Translated and reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_aliases.go:41
10.

The auto-import command searches available mounted devices looking for
assertions that are signed by trusted authorities, and potentially
performs system changes based on them.

If one or more device paths are provided via --mount, these are temporarily
mounted to be inspected as well. Even in that case the command will still
consider all available mounted devices for inspection.

Assertions to be imported must be made available in the auto-import.assert file
in the root of the filesystem.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre auto-import cerca dispositius muntats disponibles buscant per assercions
que estiguin signades per autoritats de confiança, i fa potencialment canvis al
sistema basant-se en elles.

Si es proveeixen un o més camins de dispositiu mitjançant --mount, es munten de
manera temporal per inspeccionar-los també. Fins i tot en aquest cas l'ordre considerarà
totes els dispositius muntats disponibles per ser inspeccionats.

S'han de fer disponibles les assercions a importar-se al fitxer auto-import.asser a
l'arrel del sistema de fitxers.
Translated and reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_auto_import.go:231
11.

The buy command buys a snap from the store.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre buy compra un snap de la botiga.
Translated by Aniol Garcia
Reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_buy.go:33
12.

The changes command displays a summary of system changes performed recently.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre changes mostra un resum dels canvis de sistema efectuats recentment.
Translated by Aniol Garcia
Reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_changes.go:35
13.

The check-snapshot command verifies the user, system and configuration
data of the snaps included in the specified snapshot.

The check operation runs the same data integrity verification that is
performed when a snapshot is restored.

By default, this command checks all the data in a snapshot.
Alternatively, you can specify the data of which snaps to check, or
for which users, or a combination of these.

If a snap is included in a check-snapshot operation, excluding its
system and configuration data from the check is not currently
possible. This restriction may be lifted in the future.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre check-snapshot verificarà les dades de l'usuari, sistema i configuració dels snaps inclosos a la captura especificada.

L'operació de comprovació executa la mateixa verificació d'integritat que s'efectua quan una captura es restaura.

Per defecte, aquesta ordre comprova totes les dades de la captura.
Alternativament, podeu especificar les dades a comprovar de cada snap, o
per a quins usuaris, o una combinació d'aquests.

Actualment no és possible excloure les dades de sistema i configuració d'un snap inclòs a una operació check-snapshot. Aquesta restricció pot ser retirada en el futur.
Translated by Aniol Garcia
Reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_snapshot.go:76
14.

The confinement command will print the confinement mode (strict,
partial or none) the system operates in.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre confinement mostrarà el mode de confinament (estricte,
parcial o cap) en el que opera el sistema.
Translated by Aniol Garcia
Reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_confinement.go:31
15.

The connect command connects a plug to a slot.
It may be called in the following ways:

$ snap connect <snap>:<plug> <snap>:<slot>

Connects the provided plug to the given slot.

$ snap connect <snap>:<plug> <snap>

Connects the specific plug to the only slot in the provided snap that matches
the connected interface. If more than one potential slot exists, the command
fails.

$ snap connect <snap>:<plug>

Connects the provided plug to the slot in the core snap with a name matching
the plug name.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre connect connecta un endoll a una ranura.
Pot ser cridada de les maneres següents:

$ snap connect <snap>:<endoll> <snap>:<ranura>

Connecta l'endoll proporcionat a la ranura donada.

$ snap connect <snap>:<endoll> <snap>

Connecta l'endoll específic a l'única ranura proporcionada per l'snap que coincideix
amb la interfície connectada. Si hi ha més d'una ranura potencial, l'ordre
falla.

$ snap connect <snap>:<endoll>

Connecta l'endoll donat a la ranura de l'snap nucli amb un nom coincident amb el de l'endoll.
Translated by Aniol Garcia
Reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_connect.go:37
16.

The connections command lists connections between plugs and slots
in the system.

Unless <snap> is provided, the listing is for connected plugs and
slots for all snaps in the system. In this mode, pass --all to also
list unconnected plugs and slots.

$ snap connections <snap>

Lists connected and unconnected plugs and slots for the specified
snap.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

L'ordre connections fa una llista de les connexions entre les connexions i
les ranures al sistema.

A no ser que es proveeixi <snap>, la llista és per a les connexions i ranures
connectades per a tots els snaps del sistema. En aquest mode, passeu --all
per fer també una llista de les connexions i ranures no connectades.

$ snap connections <snap>

Fa una llista de les connexions i ranures connectades i no connectades per
al snap especificat.
Translated and reviewed by Walter Garcia-Fontes
Located in cmd/snap/cmd_connections.go:42
7 → 16 of 815 results First • • • Last

This translation is managed by Ubuntu Catalan Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Adolfo Jayme Barrientos, Aniol Garcia, Biel Fiol, Giorgio Grappa, Jaume Villalba, JoanColl, Paco Riviere, Sergi Heras, Walter Garcia-Fontes, amm.