Ubuntu
snapd package

Browsing Galician translation

  1. Groovy (20.10)
  2. Template “snappy”
  3. Galician (gl)
Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Galician guidelines.

These translations are shared with snapd trunk series template snappy.

24 → 33 of 815 results First • • • Last
24.

The disconnect command disconnects a plug from a slot.
It may be called in the following ways:

$ snap disconnect <snap>:<plug> <snap>:<slot>

Disconnects the specific plug from the specific slot.

$ snap disconnect <snap>:<slot or plug>

Disconnects everything from the provided plug or slot.
The snap name may be omitted for the core snap.

When an automatic connection is manually disconnected, its disconnected state
is retained after a snap refresh. The --forget flag can be added to the
disconnect command to reset this behaviour, and consequently re-enable
an automatic reconnection after a snap refresh.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_disconnect.go:41
25.

The download command downloads the given snap and its supporting assertions
to the current directory with .snap and .assert file extensions, respectively.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

A orde «download» descarga o snap indicado e as súas asercións de apoio
ao cartafol actual coas extensións .snap e .assert respectivamente.
Translated by Marcos Lans
Located in cmd/snap/cmd_download.go:51
26.

The enable command enables a snap that was previously disabled.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

A orde «enable» activa un snap previamente desactivado.
Translated and reviewed by Marcos Lans
Located in cmd/snap/cmd_snap_op.go:115
27.

The export-key command exports a public key assertion body that may be
imported by other systems.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.

A orde «export-key» exporta un corpo da aserción da chave pública
que pode ser importado por outros sistemas.
Translated and reviewed by Marcos Lans
Located in cmd/snap/cmd_export_key.go:43
28.

The fde-setup-request command is used inside the fde-setup hook. It will
return information about what operation for full-disk encryption is
requested and auxiliary data to complete this operation.

The fde-setup hook should do what is requested and then call
"snapctl fde-setup-result" and pass the result data to stdin.

Here is an example for how the fde-setup hook is called initially:
$ snapctl fde-setup-request
{"op":"features"}
$ echo '[]' | snapctl fde-setup-result

Alternatively the hook could reply with:
$ echo '{"error":"hardware-unsupported"}' | snapctl fde-setup-result

And then it is called again with a request to do the initial key setup:
$ snapctl fde-setup-request
{"op":"initial-setup", "key": "key-to-seal", "key-name":"key-for-ubuntu-data"}
$ echo "$sealed_key" | snapctl fde-setup-result
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in overlord/hookstate/ctlcmd/fde_setup.go:36
29.

The fde-setup-result command sets the result data for a fde-setup hook
reading it from stdin.

For example:
When the fde-setup hook is called with "op":"features:
$ echo "[]" | snapctl fde-setup-result

When the fde-setup hook is called with "op":"initial-setup":
$ echo "sealed-key" | snapctl fde-setup-result
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in overlord/hookstate/ctlcmd/fde_setup.go:101
30.

The file-access command returns information about a snap's file system access.

This command is used by the xdg-document-portal service to identify
files that do not need to be proxied to provide access within
confinement.

File paths are interpreted as host file system paths. The tool may
return false negatives (e.g. report that a file path is unreadable,
despite being readable under a different path). It also does not
check if file system permissions would render a file unreadable.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_routine_file_access.go:43
31.

The find command queries the store for available packages.

With the --private flag, which requires the user to be logged-in to the store
(see 'snap help login'), it instead searches for private snaps that the user
has developer access to, either directly or through the store's collaboration
feature.

A green check mark (given color and unicode support) after a publisher name
indicates that the publisher has been verified.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_find.go:40
32.

The forget command deletes a snapshot. This operation can not be
undone.

A snapshot contains archives for the user, system and configuration
data of each snap included in the snapshot.

By default, this command forgets all the data in a snapshot.
Alternatively, you can specify the data of which snaps to forget.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
Located in cmd/snap/cmd_snapshot.go:66
33.

The get command prints configuration options for the current snap.

$ snapctl get username
frank

If multiple option names are provided, a document is returned:

$ snapctl get username password
{
"username": "frank",
"password": "..."
}

Nested values may be retrieved via a dotted path:

$ snapctl get author.name
frank

Values of interface connection settings may be printed with:

$ snapctl get :myplug usb-vendor
$ snapctl get :myslot path

This will return the named setting from the local interface endpoint, whether a plug
or a slot. Returning the setting from the connected snap's endpoint is also possible
by explicitly requesting that via the --plug and --slot command line options:

$ snapctl get :myplug --slot usb-vendor

This requests the "usb-vendor" setting from the slot that is connected to "myplug".
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
There are leading/trailing spaces here. Each one represents a space character. Enter a space in the equivalent position in the translation.

A orde «get» imprime as opcións de configuración do snap actual.

$ snapctl get nome_do_usuario
catuxa

Se se proporcionan varios nomes de opcións, devolve un documento:

$ snapctl get nome_do_usuario contrasinal
{
"username": "catuxa",
"password": "..."
}

Os valores aniñados poden obterse indicando a ruta con puntos:

$ snapctl get author.name
catuxa

Os valores dos axustes da conexión da interface poden imprimirse con:

$ snapctl get :conector usb-vendor
$ snapctl get :rañura ruta

Isto devolverá o parámetro indicado desde o extremo da interface local, sen un conector nin rañura. A devolución do parámetro desde o extremo do snap conectado tamén é posíbel por petición
explícita por medio das opcións por liña de ordes --plug e --slot:

$ snapctl get :conector --slot usb-vendor

Isto solicita o parámetro «usb-vendor» desde a rañura ligada ao «conector».
Translated and reviewed by Marcos Lans
Located in overlord/hookstate/ctlcmd/get.go:52
24 → 33 of 815 results First • • • Last

This translation is managed by Ubuntu Galician Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Antón Méixome, Marcos Lans, Marcos Lans, Xosé.