|
|
15.
|
|
|
PURPOSE: 
Check that external line out connection works correctly
STEPS:
1. Insert cable to speakers (with built-in amplifiers) on the line out port
2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
VERIFICATION:
1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
2. Do you hear the sound coming out on the corresponding channel? |
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
|
ΣΚΟΠΟΣ:
Έλεγχος για το αν η εξωτερική σύνδεση line out λειτουργεί σωστά
ΒΗΜΑΤΑ:
1. Εισάγετε το καλώδιο των ηχείων (με ενσωματωμένο ενισχυτή) στη θύρα line out
2. Ανοίξτε τις προτιμήσεις ήχου συστήματος. Στην καρτέλα «Έξοδος». επιλέξτε 'Line-out' από τη λίστα συνδέσεων. Κάντε κλικ στο κουμπί του τεστ
3. Στις προτιμήσεις ήχου συστήματος, επιλέξτε «εσωτερικός ήχος» στη λίστα συσκευών και κάντε κλικ στην επιλογή «Δοκιμή ηχείων» για να ελέγξετε το αριστερό και το δεξί κανάλι
ΕΠΑΛΗΘΕΥΣΗ:
1. Ακούτε έναν ήχο στα ηχεία; Τα εσωτερικά ηχεία *δεν* θα πρέπει να σιγαστούν αυτόματα
2. Ακούτε τον ήχο να έρχεται από το κανάλι που αντιστοιχεί; |
|
Translated by
Kostas Milonas
|
|
|
|
Located in
../jobs/audio.txt.in:208
|
|
|
16.
|
|
|
PURPOSE:
Check that external line in connection works correctly
STEPS:
1. Use a cable to connect the line in port to an external line out source.
2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
3. After a few seconds, your recording will be played back to you.
VERIFICATION:
Did you hear your recording? |
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
|
ΣΚΟΠΟΣ:
Να ελεγχθεί αν η εξωτερική σύνδεση line in δουλεύει σωστά
ΒΗΜΑΤΑ:
1. Χρησιμοποιήστε ένα καλώδιο για να συνδέσετε τη θύρα line in σε μια εξωτερική πηγή line out.
2. Ανοίξτε τις προτιμήσεις ήχου συστήματος, πηγαίνετε στην καρτέλα «Είσοδος» και επιλέξτε 'Line-in' στη λίστα συνδέσεων. Κάντε κλικ στο κουμπί του τεστ.
3. Μετά από κάποια δευτερόλεπτα, ό,τι ηχογραφήσετε θα αναπαραχθεί για να το ακούσετε.
ΕΠΑΛΗΘΕΥΣΗ:
Ακούσατε την ηχογράφησή σας; |
|
Translated by
Kostas Milonas
|
|
|
|
Located in
../jobs/audio.txt.in:228
|
|
|
17.
|
|
|
PURPOSE:
Check that system detects speakers or headphones being plugged in
STEPS:
1. Prepare a pair of headphones or speakers with a standard 3.5mm jack
2. Locate the speaker / headphone jack on the device under test
3. Run the test (you have 30 seconds from now on)
4. Plug headphones or speakers into the appropriate jack
5. Unplug the device for subsequent tests.
VERIFICATION:
Verification is automatic, no action is required.
The test times out after 30 seconds (and fails in that case). |
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:245
|
|
|
18.
|
|
|
PURPOSE:
Check that system detects a microphone being plugged in
STEPS:
1. Prepare a microphone with a standard 3.5mm jack
2. Locate the microphone jack on the device under test.
Keep in mind that it may be shared with the headphone jack.
3. Run the test (you have 30 seconds from now on)
4. Plug the microphone into the appropriate jack
5. Unplug the device for subsequent tests.
VERIFICATION:
Verification is automatic, no action is required.
The test times out after 30 seconds (and fails in that case). |
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:265
|
|
|
19.
|
|
|
PURPOSE:
Check that balance control works correctly on internal speakers
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual speaker audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output? |
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:289
|
|
|
20.
|
|
|
PURPOSE:
Check that balance control works correctly on external headphone
STEPS:
1. Check that moving the balance slider from left to right works smoothly
2. Click the Test button to play an audio tone for 10 seconds.
3. Move the balance slider from left to right and back.
4. Check that actual headphone audio balance follows your setting.
VERIFICATION:
Does the slider move smoothly, as well as being followed by the setting by the actual audio output? |
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:310
|
|
|
21.
|
|
|
Test to detect audio devices after suspending 30 times.
|
|
|
description
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:329
|
|
|
22.
|
|
|
PURPOSE:
This test will check that internal speakers work correctly after suspending 30 times.
STEPS:
1. Make sure that no external speakers or headphones are connected
If testing a desktop, external speakers are allowed
2. Click the Test button to play a brief tone on your audio device
VERIFICATION:
Did you hear a tone? |
|
|
description
|
|
|
represents a line break.
Start a new line in the equivalent position in the translation.
|
|
|
represents a space character.
Enter a space in the equivalent position in the translation.
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:341
|
|
|
23.
|
|
|
Play back a sound on the default output and listen for it on the default input, after suspending 30 times.
|
|
|
description
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:364
|
|
|
24.
|
|
|
This test will verify that the volume levels are at an acceptable level on your local system. The test will validate that the volume is greater than or equal to minvol and less than or equal to maxvol for all sources (inputs) and sinks (outputs) recognized by PulseAudio. It will also validate that the active source and sink are not muted. You should not manually adjust the volume or mute before running this test.
|
|
|
description
|
|
|
|
|
(no translation yet)
|
|
|
|
Located in
../jobs/audio.txt.in:376
|
